Press-fitted sheet steel blank, sprayed with PP plastic
Number of blades
5
Direction of air flow
"V"
Direction of rotation
Counter-clockwise, seen on rotor
Type of protection
IP 54
Insulation class
"B"
Humidity class
F4-1
Max. permissible ambient motor temp. (transp./ storage)
+ 80 °C
Min. permissible ambient motor temp. (transp./storage)
- 40 °C
Mounting position
Shaft horizontal or rotor on bottom; rotor on top on request
Condensate discharge holes
Rotor-side
Cooling bore / aperture
On rotor sides
Operation mode
S1
Motor bearing
Ball bearing
Technical features
- Control input 0-10 VDC / PWM - Over-temperature protected electronics / motor - Alarm relay - PFC, active - Integrated PID controller - Input for sensor 0-10 V and 4-20 mA - Output for slave 0-10 V - RS485 ebmBUS - Line undervoltage detection - Motor current limit - Soft start - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA